Creator 4

Creator 4
SPEED UP DESIGN ITERATION AND PRODUCTIZATION Creator 4 is equipped with industrial-grade printing configuration and advanced temperature control management system, which can more accurately controls the printing of engineering consumables during the whole process of each printing. The printed parts have excellent mechanical strength and precision, and the large-size model can adapt to the application requirements of different scenarios. Creator 4 uses a multi-configuration, interchangeable extruder module, refreshes the limitations of material application and is suitable for printing flexible, standard, engineering and carbon fiber composite materials. According to different application demands, Creator 4 will choose the best configuration scheme, to provide enterprise customers with the best cost control plan from designing to finished products. Equipped with engineering filament series and Creator Elite made of German LEHVOSSS raw materials, Creator 4 is able to print stronger parts. Newly developed FlashPrint software can be integrated to control more Flashforge printer
Get a Quote
Interchangeable printing modules for different filaments.
IDEX, creates high-quality and detailed prints
Wrap free on large-scale parts
Intelligent filament management system and outstanding performance
5000 hours of stable and continuous printing
INTERCHANGEABLE PRINTING MODULES
1+3+2 modules
1device +3 extruder+2 filament detector Unlock requirements of materials printing. |
![]() |
![]() |
![]() |
EXTRUDER -F | EXTRUDER -HT | EXTRUDER -HS | |
Printing temp | 180-265℃ | 200-320℃ | 265-360℃ |
Filament diameter | 2.85mm | 1.75mm | 1.75mm |
Max printing speed | 100mm/s | 200mm/s | 150mm/s |
Nozzle diameter | 0.4mm | 0.4mm | 0.6mm |
Applicable | TPU/ TPE/TPB/TPC | PC/PA/PP/PETG/ASA/ ABS/PLA/PC-ABS |
PACF/ PET-CF/ PP-CF/PAGF/ PC-ABS/PP-GF/PPS- CF |
INDEPENDENT DUAL EXTRUDER
- IDEX is the only extrusion system capable of printing with two heads independently. This system allows enabling Duplication and Mirror printing modes so as to print two pieces at a time. Doubled printing capacity means double productivity, all with the same investment.
- IDEX is the best option for production optimization to create functional 3D printed parts with advanced materials.
- Direct drive for smooth extruding.
SMART FILAMENT MANAGEMENT
- Intelligent identification of material types and automatic matching of heating temperature;
- Intelligent identification of material options, automatic setting of cavity pre-reserved temperature, to ensure the success rate of printing;
- Free to adjust the cooling temperature, ready for the next print, no more waiting.
- Open material system, compatible with third party filaments.
WARP FREE ON LARGE-SCALE PARTS
- The new thermally controlled build chamber helps to avoid heat stress and warping of parts. Especially those difficult to print engineering filaments.
- Advanced software controls preheating and heat preservation before and after printing to ensure the mechanical properties of the finished
model. - Prevent the engineering filaments like ABS/PC from warping and splitting.
- Interconnected filament compartment and printing chamber helps to keep the printing environment dry. Users may observe the humidity directly with temperature and humidity sensor equipped in the filament compartment. The filament status can be guaranteed and printing performance would be improved time by time.
Specification
Type | Creator 4 - F | Creator 4 - A | Creator 4 - S |
Extruder | Extruder - F | Extruder - HT | Extruder - HS |
Filament | TPU85A/TPE TPB/TPC |
PLA/PETG/PC-ABS/ PAHT/ABS/ASA/PP PA/PC |
PACF/PET-CF/PP-CF PA-GF/PC-ABS/PP-GF PPS-CF/PPS |
Extruder Type | IDEX | IDEX | IDEX |
Nozzle Size | 0.4mm | 0.4(0.6/0.8)mm | 0.4mm |
Extruder Temperature | 265℃ | 320℃ | 360℃ |
Maximum Chamber Heating Temperature |
65℃ | 65℃ | 65℃ |
Build Volume | 400*350*500mm | 400*350*500mm | 400*350*500mm |
Printing Speed | 100mm/s | 200mm/s | 150mm/s |
Maximum Platform Heating Temperature |
120℃ | 120℃ | 120℃ |
Touch Screen | 7-Inch touch screen | 7-Inch touch screen | 7-Inch touch screen |
Support Filament Weight | 2kg/1kg | 2kg/1kg | 2kg/1kg |
Submit Your Review
Required fields are marked *
John Doe March 22, 2021 at 1:54 pm
pellentesque habitant morbi tristique senectus et. In dictum non consectetur a erat. Nunc ultrices eros in cursus turpis massa tincidunt ante in nibh mauris cursus mattis. Cras ornare arcu dui vivamus arcu felis bibendum ut tristique.