Esun eResin-Elastic

Esun eResin-Elastic
The eSun flexible 3D printing resin offers high flexibility and elasticity, as well as good toughness and wear-resistance. Esun flexible resin is a perfect new material for resin prints that require some flexibility, like cushions, handles, and grips.
Get a Quote
High Precision
High hardness
Shore A: 85-90
Density: 1.13 – 1.15 g/m3
Viscosity: 1200 mPa at 25C
Wavelength: 405nm
Shrinkage: 6,9%
Tensile strength: 6-8 MPa
Elongation at break: 100-150%
Tearing Strength: 390-320 kN-m
Flexural strenght: 77 MPa
Flexural modulus: 2350 MPa
IZOD Impact strenght: 44 J/m
The eSun flexible 3D printing resin offers high flexibility and elasticity, as well as good toughness and wear-resistance. Esun flexible resin is a perfect new material for resin prints that require some flexibility, like cushions, handles, and grips.
Product Features
- Shore A hardness of 85-90
- High flexibility, no break after multiple folds
- Good toughness and wear-resistance
- Low odor
Printing Recommendations
The recommended print temperature is 25-35℃. Heating before use is needed under low temperatures.
Make sure the rising height is more than 8mm after exposure of each layer. The rising speed is within 60 mm/min. The waiting time between two exposure is more than 10s.
Put the printed model in water for post-curing, then under direct sunlight for 30 min, or under LED light for 15mins.
Mechanical Properties
Mechanical properties of post-cured material
Shore A Hardness | 85-90 |
Tensile strength MPa | 6-8 |
Elongation at break/% | 100-150 |
Tearing Strength/kN·m-1 | 390-420 |
Proportion(H2O,25℃) | 1.116 |
Contents
- Bottle: 500Gr
- Color: Yellow transparant
How to use
- Suggest printing temperature is 25-35℃.
- When printing in low temperature it need heating ( 40-60℃) before using
- Lift height > 8mm.
- Lift speed ~ 60 mm/min.
- The waiting time between two exposure > 10s
- Put printed model in water for post curing. Use direct sunlight for 30 min, or UV LED light for 15mins .
Notes & Warnings
- Always wear personal protection (gloves, glasses) when handling resin
- Use your resin 3D printer under well ventilated circumstances
- Suggested safety equipment: gloves, mask, glasses, and lab coat
- Do not expose UV resin to sunlight or indoor light containing UV
- In case you consume UV resin, get medical advise
- In case resin get's in your eye, wash your eyes with water and get medical advise
- Resin can cause skin irritation, always wear gloves when handling
- Please keep UV resin away from kids
- Keep resin at room temperature(15 - 35 OC) and dry condition.
Submit Your Review
Required fields are marked *
John Doe March 22, 2021 at 1:54 pm
pellentesque habitant morbi tristique senectus et. In dictum non consectetur a erat. Nunc ultrices eros in cursus turpis massa tincidunt ante in nibh mauris cursus mattis. Cras ornare arcu dui vivamus arcu felis bibendum ut tristique.