Bambu Lab X2D COMBO
Selling fast! 38 people have this in their carts.
- Dual-Nozzle 3D Printing
- Faster Multi-Color Printing & Cleaner Support Removal
- 300 °C Nozzle & 65 °C Active Chamber Heating
- Closed-Loop Servo Motor Extruder
- Full Filament Path AI Detection
- 256 × 256 × 260 mm³ Print Volume
- Voltage Range: 100 – 120 V
- To connect more than two AMS (including AMS 2 Pro, AMS HT), a 4-in-1 PTFE Adapter (FAZ013-N) is needed
* Cybersecurity compliant with EU RED Article 3.3(d)(e) and ETSI EN 303 645
Return within 2 days of purchase.
Guarantee Safe Checkout
Bambu Lab X2D COMBO
Featured Collection
Dual nozzle
Multi-material made simple.
Servo Extruder
Smooth surfaces at full speed.
Dual-intake cooling
Crisp details.
Active heating.
Stronger parts.
Adaptive Calibration.
Lasting precision
AI Monitoring
Your built-in backup.
Certified Emissions
Designed for your home.
Finer. Sharper. True to the design.
Add more color, more details and more fun.
Fuse PLA and TPU in a single model. Create bags, grips, and bumpers that come off the bed ready to use.
Dual nozzles swap in a split second. Enioy faster color chanqes. cleaner transitions, and far less waste.
Finer. Sharper. True to the design.
Cool it. Before gravity makes it droop.
Two intakes are always better than one. Freshly extruded filament is soft, but the X2D instantly flushes the chamber with cool air from dual left and right intakes. This constant air exchange stabilizes each layer for low-temperature filaments like PLA, cooling every line at exactly the right moment. So even on tricky angles, overhangs stay sharp and bridges stay clean.
Cool it. Before gravity makes it droop.
Two intakes are always better than one. Freshly extruded filament is soft, but the X2D instantly flushes the chamber with cool air from dual left and right intakes. This constant air exchange stabilizes each layer for low-temperature filaments like PLA, cooling every line at exactly the right moment. So even on tricky angles, overhangs stay sharp and bridges stay clean.
Calibration adapts to wear and material changes.
Most printers calibrate flow with a single K factor and use it in all scenarios. Bambu Lab doesn't. Flow Dynamics Calibration³ builds a time-varying, nonlinear model of your entire extrusion system. So whether there's minor residue inside the nozzle, gradual nozzle wear, or slightly damp filament, the system detects, calibrates, and compensates. Smooth surfaces and sharp edges stop being luck. They repeat.
PMSM Servo System: Smoother surfaces start inside the extruder.
Extruder gears grind into filament as they feed it, causing small pressure fluctuations that show up as tiny lines on the surface. Exclusive to Bambu Lab, the PMSM servo system⁵ counters this in real time. With resistance and position sampling at 20 kHz, it adjusts electromagnetic torque on the fly, smoothing out every micro-fluctuation before it reaches the surface.
Smooth surface quality.
Extrusion pressure stays precisely controlled, so flow stays stable and surface finish remains clean and uniform, print after print.
Compensation makes corners sharp and details clean.
Ringing and ghosting blur edges at high speed. Active Vibration Compensation cancels them in real time - so edges print crisp, no matter how fast.
AI Camera keeps an eye on your prints.
Before printing, the AI Liveview Camera and Toolhead Camera scan the build plate for foreign objects and verify plate placement. During printing, they watch for spaghetti, nozzle clumping, and purge-chute jams in real time - pausing the job before it wastes hours of time and filament.
Fully-equipped sensors cover every critical stage.
31 sensors span the entire system - monitoring the feeding path, printing process, thermal environment, and machine safety in real time. Every variable that affects your print is measured, checked, and acted on.
All the must-haves for everyday use.
Clean air. Always.
X2D runs a three-stage filtration system every time it prints. A G3 pre-filter, an H12 HEPA filter, and a coconut-shell activated carbon layer work together to reduce odors and airborne particles. The same trusted filtration system used in H Series printers. Quiet. Clean. Ready for everyday spaces⁶.
Safe for your living room.
The X2D is UL 2904 certified for indoor air quality when printing with Bambu PLA Basic and PETG Basic. Confirmed for low particle and VOC emissions - so you can print in your personal space with peace of mind.
Tool-free nozzle swap.
Swap nozzles in seconds. No tools, no hassle. Easy for first-time users.
Quiet enough for overnight prints.
Active Motor Noise Canceling and a noise-optimized air duct keep X2D below 50 dB under typical conditions. Quiet enough for overnight printing.
See every detail, remotely.
Brighter chamber lighting makes Live View and time-lapse clearer than ever, so you can check on prints from anywhere.
One million switches. Still smooth.
X2D's dual-nozzle system completed over 1,000,000 switch cycles in life-cycle testing, maintaining smooth and consistent motion throughout. Built for years of dependable use.
What’s in the box
| X2D | X2D AMS Combo | |
|---|---|---|
|
1 | 1 |
|
1 | 1 |
|
1 | 1 |
|
1 | 1 |
|
1 | 1 |
|
1 |
Additional Information
Bambu Lab X2D Technical Specifications
| Printing Technology | Fused Deposition Modeling (FDM) |
| Build Volume (Main Nozzle) | 256 × 256 × 260 mm³ |
| Build Volume (Auxiliary Nozzle) | 235.5 × 256 × 256 mm³ |
| Build Volume (Dual Nozzle) | 235.5 × 256 × 256 mm³ |
| Total Build Volume (Two Nozzles) | 256 × 256 × 260 mm³ |
| Max Nozzle Temperature | 300 °C |
| Included Nozzle Diameter | 0.4 mm |
| Supported Nozzle Diameters | 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm |
| Filament Diameter | 1.75 mm |
| Filament Cutter | Built-in |
| Chassis | Plastic and Steel |
| Outer Frame | Plastic, Glass, and Metal |
| Physical Dimensions | 392 × 406 × 478 mm³ |
| Recommended Printer Space | 500 × 700 × 850 mm |
| Net Weight | 16.25 kg |
| Gross Weight | X2D: 20.2 kg, X2D AMS Combo: 22.2 kg |
| Main Extruder Gear | Hardened Steel |
| Main Extruder Motor | Bambu Lab High-precision Permanent Magnet Synchronous Motor |
| Auxiliary Extruder Gear | Hardened Steel |
| Auxiliary Extruder Motor | Stepper Motor |
| Nozzle Material | Hardened Steel |
| Supported Build Plates | Textured PEI Plate, Smooth PEI Plate, Cool Plate SuperTack, Engineering Plate |
| Max Heatbed Temperature | 120 °C |
| Active Chamber Heating | Supported |
| Maximum Chamber Temperature | 65 °C |
| Max Toolhead Speed | 1000 mm/s |
| Max Toolhead Acceleration | 20,000 mm/s² |
| Max Flow Rate (Standard Flow Hotend) | 40 mm³/s |
| Max Flow Rate (High Flow Hotend) | 65 mm³/s |
| Pre-filter Grade | G3 |
| HEPA Filter Grade | H12 |
| Activated Carbon Filter | Granulated Coconut Shell |
| VOC Filtration | Supported |
| Particulate Matter Filtration | Supported |
| Cooling System | Part Cooling Fan, Hotend Fan, Main Control Board Fan, Chamber Exhaust Fan, Chamber Heat Circulation Fan, Auxiliary Part Cooling Fan (All Closed Loop Control) |
| Main Hotend Materials | PLA, PETG, ABS, ASA, TPU, PET, PA, PC, PVA, Support Materials, Carbon/Glass Fiber Reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PPA, PET |
| Auxiliary Hotend Materials | PLA (excluding PLA Aero), PETG, ABS, ASA, TPU for AMS, PET, PA, PC, PVA, Support Materials, Carbon/Glass Fiber Reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PET |
| Auxiliary Hotend (Use with Caution) | PLA Silk, PETG-CF, ASA-CF, PA6-CF, TPU for AMS, Support for PA/PET |
| Live View Camera | Built-in, 1920 × 1080 |
| Toolhead Camera | Built-in, 1600 × 1200 |
| Door Sensor | Supported |
| Filament Run-Out Sensor | Supported |
| Filament Tangle Sensor | Supported |
| Filament Odometry | Supported with AMS |
| Power Loss Recovery | Supported |
| Input Voltage | 100 - 120 VAC, 50/60 Hz |
| Maximum Power Consumption | 1100 W @ 110 V |
| Steady-State Power (PLA) | 250 W @ 110 V |
| Steady-State Power (PC) | 550 W @ 110 V |
| Operating Temperature | 10 °C - 30 °C |
| Touchscreen | 5-inch, 1280 × 720 |
| Storage | Built-in 8 GB eMMC and USB Port |
| Control Interface | Touchscreen, Mobile App, PC App |
| Motion Controller | Dual-core Cortex-M4 and Single-core Cortex-M7 |
| Application Processor | Quad-core ARM with Dedicated NPU |
| Slicer | Bambu Studio |
| Supported Operating Systems | macOS, Windows, Linux |
| Ethernet | Not Available |
| Wireless Network | Dual-Band Wi-Fi |
| Network Kill Switch | Not Available |
| Removable Network Module | Not Available |
| 802.1X Network Access Control | Not Available |
| Wi-Fi Frequency | 2.4 GHz and 5 GHz Bands |
| Wi-Fi Protocol | IEEE 802.11 a/b/g/n |
