Home eSUN PLA-LW 3D Filament

eSUN PLA-LW 3D Filament

SKU: PLA-LW175W1Y1
Sale price AED 153.00
Size: 1.75MM
Weight: 1 KG
Color: White
Features
  • Density as low as 0.54g/cm3
  • Foaming volume ratio 220%
  • Free adjustment of strength and foaming ratio
  • Excellent matte surface effect
  • Good interlayer adhesion
  • Easy to paint
  • Excellent printability
Add to Wishlist Add to Compare
Order in the next to get it between and

Compare color

eSUN PLA-LW 3D Filament
White
eSUN PLA-LW 3D Filament
Black

Ask a question
Share

Estimate delivery times: 1-2 days

Return within 2 days of purchase.

Guarantee Safe Checkout

eSUN PLA-LW 3D Filament

eSUN PLA-LW 3D Filament

eSUN ePLA-LW – Lightweight PLA for Aeromodelling

Foam-Optimized. Flight-Ready.
A material specially developed for aeromodelling. The interlayer bonding is stable, and the foaming rate and strength can be controlled by adjusting the printing temperature. Using active foaming technology to achieve lightweight, low-density PLA parts, the foaming volume ratio is 220%, and the density is as low as 0.54g/cm3. Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. Under the same model and at the same speed, the lightweight PLA enables the model aircraft to have a lighter wing load and a lower stall speed, which can greatly improve the performance of the model aircraft.

Low density & High Foaming Volume Ratio
ePLA-LW has applied active foaming technology to achieve lightweight, low-density PLA parts. The highest foaming volume ratio is 220%, and when printing the same volume model, 1 roll of ePLA-LW can be used as 2.2 rolls of ordinary PLA. Density is only 0.54g/cm3
Clog-free & No Warping & Less-tangle
Full mechanical winding and strict manual examination ensure tangling free and avoid filament breaking and snapping.eSUN ePLA-LW filament is orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder.It does not overlap or tangle,no cracking. It has an excellent printing successful rate for large printing models and don't need a constant temperature chamber.
Easy to Paint & Wide Application
eSUN ePLA-LW lighweight PLA filament is very easy to paint and has a strong adhesion of surface paint. So it is a good choice for model airplanes, drones, and COSPLAY props.
Good Interlayer Adhesion & Matte Printing Effect
Compared to wood PLA filament,ePLA-LW filament has more stable interlayer adhesion, and the foaming rate and strength can be controlled by adjusting the printing temperature between 210℃-270℃. Printing models is explosion resistant and easy to repair with delicate matte surface effect.
Foaming When Printing
At around 210°C-270°C, this filament starts to foam during printing, increasing its volume by nearly 1.2 times, and the printing extrusion rate can be reduced to 45% to print lightweight parts. For same model and printing speed, ePLA-LW enables the model aircraft to have a lighter wing load and a lower stall speed. For models such as airplanes, under the condition of balanced strength, reducing the weight can greatly improve the performance of the airplane.

PLA-LW Technical Specifications

Extruder Temperature 190 - 270°C
Bed Temperature 45 - 60°C
Printing Speed 40 - 100 mm/s
Fan Speed 100%
Heated Bed Optional
Recommended Build Surfaces Masking Paper, PVP Solid Glue, PEI
Print Recommendation View Notes
Density 1.2 g/cm³
Heat Distortion Temperature 53°C (0.45MPa)
Melt Flow Index 8.1 g/10min (190°C/2.16kg)
Tensile Strength 32.2 MPa
Elongation at Break 68.9%
Flexural Strength 41.31 MPa
Flexural Modulus 1701 MPa
IZOD Impact Strength 8.58 kJ/m²
Printability 9/10
Durability 4/10
Flexible —
Elastic —
Impact Resistant —
Soft —
Composite —
UV Resistant —
Water Resistant —
Dissolvable —
Heat Resistant —
Chemically Resistant —
Fatigue Resistant —
Need Drying —
Heated Bed Required —